ITO conductive glass for use and storage and handling methods

ITO conductive glass to use:
Any time does not allow stacking;
In addition to the provisions generally require vertical placement; flat operation, try to keep the ITO side down; thickness of 0.55mm or less vertical glass can be placed;
Can only take place when the contact edges, can not touch the surface of ITO custom lcd display conductive glass;
Gently, not with other fixtures and machine collision;
If you want long term storage, be sure to pay attention to moisture, so as not to affect the resistance and transmittance of the glass;
For large area and a long strip of glass to be considered in the design layout of the float glass substrate orientation.
ITO conductive glass storage and handling methods:
ITO conductive glass storage methods:
ITO conductive glass should be stored at room temperature, and humidity below 65% dry preservation; storage is maintained vertical glass when placed between the glass stacked no more than two-story, wooden boxes stacked cargo loaded ITO conductive glass can not exceed five. ITO OLED Module conductive glass loading cartons of goods, in principle, can be stacked.
ITO conductive glass handling methods:
Fragile, handle with care, maintaining stability during transportation, handling time should not exceed three storeys.