Frame interpolation technology popular

As early as 2006, because LCD exist response time tailing phenomenon, so a lot of manufacturers in order to solve this problem through the IC chip from the start, launched a number of solutions. BenQ launched the beginning of the "plug black" technology, followed by other manufacturers also used a similar technique, although the names and details are different, but the basic principle roughly.

The beginning display manufacturers adopted Over Driving technology

In fact as early as BenQ "plug black" before the display manufacturers to use Over Driving technology, which is the principle of forcible IC chip to increase the voltage across the liquid crystal panel to accelerate the deflection of the liquid crystal molecules, which play a role in reducing the response time, However, this approach does not fundamentally eliminate tailing phenomenon, but rather due to improper control pressure produce similar white blur, and many other side effects, so the technology did not able to get a good promotion and application.

BenQ monitors used "plug black" technology

BenQ's "plug black" low temperature lcd display technology will solve dynamic picture while producing ghosting problem, to achieve this objective should take two steps, the first step is to reduce the gray response time, the second step is to eliminate the steady-state display Smooth edges of ways. Use the two screens inserted between the way black screen, will effectively solve the smear effect.

Because the LCD display of the steady-state mode (display elements, such as backlight source is always displayed after opening at a certain level, unless you turn off, during which the change because the screen does not change), while the human eye in Look dynamic picture of the brain signals are transmitted automatically do the integral luminance conditions, so even if the response time of liquid crystal displays 0ms, will still see the blur, so "black plug" technology to simulate a CRT monitor pulse display, so that you can effectively solve the afterimage phenomenon.

Now insert the calculated display manufacturers to use the form of frames

However, not every image is made of black pixels as the main display, so just insert only the black frame is clearly not enough, so now many monitors and television manufacturers calculation frame frames inserted, namely IC chip based on two picture to calculate an element, allowed to have a better transition, and its principles and objectives and about "black plug" technique similar to, but different from the inserted frames. According to the actual needs of the user can see the different parameters on the lcd graphic display manufacturers fixed the case can also post an IC chip technology for different tuning and improvement to meet user demand for more.